Cadillac on certain passenger vehicles involved in this campaign, the lower control arm ball stud NUT/WASHER assemblies with washers were made of the wrong material.
The short version
GENERAL MOTORS CORP. reported a problem with the steering linkages. Here is what owners need to know.
ON CERTAIN PASSENGER VEHICLES INVOLVED IN THIS CAMPAIGN, THE LOWER CONTROL ARM BALL STUD NUT/WASHER ASSEMBLIES WITH WASHERS WERE MADE OF THE WRONG MATERIAL. THE WASHERS MAY FRACTURE AND BECOME LOOSE OR FALL AWAY FROM THE VEHICLE, REDUCING CLAMP LOAD.
IF THE CONTROL ARM SEPARATES FROM THE KNUCKLE, THE AFFECTED CORNER OF THE VEHICLE WILL DROP AND THE CONTROL ARM WOULD BE FORCED DOWNWARD, CONTACTING THE WHEEL. THE AFFECTED WHEEL COULD TILT OUTWARD AND CREATE A DRAGGING ACTION THAT WOULD TEND TO SLOW THE VEHICLE AND CREATE A TENDENCY FOR THE VEHICLE TO TURN IN THE DIRECTION OF THE AFFECTED WHEEL.
DEALERS WILL INSPECT THE BALL STUD JOINTS AND MEASURE THE TORQUE OF THE NUT FOR ALL FRONT LOWER CONTROL ARMS IN ALL MODELS AFFECTED AS WELL AS THE REAR LOWER CONTROL ARMS ON THE XLR AND CORVETTE, free of charge.
Affected vehicles
These model years are included in NHTSA campaign 04V-273.
| YEAR RANGE | MODEL |
|---|---|
| 2004 | Cadillac CTS |
| 2004 | Cadillac SRX |
What changed
Newest first. The record shows both when the recall began and what has changed since.
- Recall reported to NHTSA. LATEST
Drive one of these? Check your VIN to see if your specific vehicle is affected.
Check your VINWhat this record means
Data from the NHTSA recall database. A clean VIN check means no open federal recalls for that vehicle — not that it never had one.
Not affiliated
MyAutoRecalls is not affiliated with GENERAL MOTORS CORP. or the National Highway Traffic Safety Administration.