Navistar electrical overload condition in the BCM from the starter solenoid may occur and cause damage to the starter circuit of the BCM, possibly resulting in an unintended command to crank the engine when the ignition key is in the run position and the transmission is in the park or neutral position.
The short version
Navistar, Inc. reported a problem with the ignition module. Here is what owners need to know.
An electrical overload condition in the BCM from the starter solenoid may occur and cause damage to the starter circuit of the BCM, possibly resulting in an unintended command to crank the engine when the ignition key is in the run position and the transmission is in the park or neutral position.
If the ignition is in the run position and the engine starts unexpectedly while the vehicle is being serviced, there would be an increased risk of personal injury.
Navistar will notify owners, and dealers will install an overlay harness and relay to provide electrical power to the starter circuit, instead of using the BCM to provide power, free of charge.
Affected vehicles
These model years are included in NHTSA campaign 19V-534.
| YEAR RANGE | MODEL |
|---|---|
| — | See NHTSA record 19V-534 |
What changed
Newest first. The record shows both when the recall began and what has changed since.
- Recall reported to NHTSA. LATEST
Drive one of these? Check your VIN to see if your specific vehicle is affected.
Check your VINWhat this record means
Data from the NHTSA recall database. A clean VIN check means no open federal recalls for that vehicle — not that it never had one.
Not affiliated
MyAutoRecalls is not affiliated with Navistar, Inc. or the National Highway Traffic Safety Administration.