Check your VIN

Altec AT200A recalls

8 recall campaigns for the Altec AT200A, newest first.

  1. Altec units mounted on certain Ford E350 van chassis with Gross Axle Weight Rating (gawr) of 4050 and 4200 pounds, may fail at high loads due to a defect in the front axle. 2017 Altec AT200A 24V-952 · December 20, 2024
  2. Altec ground-fault circuit interrupter (gfci) outlet may not provide adequate circuit protection against an electrical overload condition. 2016 Altec AT200A, AT30-G 22V-469 · June 30, 2022
  3. Altec rear tire size and load rating may be incorrect, possibly resulting in the vehicle being overloaded. 2016 Altec AT200A 20V-187 · March 30, 2020
  4. Altec in the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust. 2010 Altec AT200A, AT235, AT235P +5 more 13V-458 · September 26, 2013
  5. Altec battery cable going to the unit auxiliary functions could be damaged and possibly short to ground. 2010 Altec AT200A, AT235, AT235P +5 more 13V-224 · May 29, 2013
  6. Altec official notice describes a safety defect, but the details were not provided in plain language. 2012 Altec AT200A, AT235, AT235P +3 more 12V-390 · August 8, 2012
  7. Altec these units are equipped with billet steel counterweight that is welded in place. 2006–2009 Altec AT200A, AT235P, AT237 +2 more 11V-197 · March 28, 2011
  8. Altec there is a potential hydraulic hose routing condition in the engine compartment. 2006–2008 Altec AT200A, AT235, AT235P +1 more 10V-399 · September 2, 2010