Check your VIN

Great Dane Champion recalls

18 recall campaigns for the Great Dane Champion, newest first.

  1. Great Dane as such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 224, "Rear Impact Protection." 2027 Great Dane Champion 26V-465 · July 17, 2026
  2. Great Dane deck pins may break, resulting in the liftgate platform falling. 2026 Great Dane Champion 26V-383 · June 11, 2026
  3. Great Dane cylinder pin in the slide liftgate may be insufficiently lubricated, which can cause the pin to seize, resulting in lift gate failure. 2024 Great Dane Champion 25V-848 · December 9, 2025
  4. Great Dane roll-up door operator bolts may not have been properly tightened and increasing the force required to open or close the door. 2026 Great Dane Champion 25V-429 · June 26, 2025
  5. Great Dane tires may have been manufactured incorrectly with one of the three stabilizer ply belts applied in the wrong orientation. 2025 Great Dane Champion 25V-200 · March 28, 2025
  6. Great Dane missing kingpin welds may prevent the upper coupler from securely connecting the trailer. 2025 Great Dane Champion 24V-922 · December 11, 2024
  7. Great Dane rear impact guard may have been welded improperly. 2025 Great Dane Champion 24V-689 · September 13, 2024
  8. Great Dane VINs on the certification label may be incorrect. 2023 Great Dane Champion 23V-852 · December 15, 2023
  9. Great Dane axle spindle nut may have been improperly tightened. 2024 Great Dane Champion 23V-839 · December 12, 2023
  10. Great Dane all 8 tires may experience a loss of tire pressure while driving faster than 45 mph. 2024 Great Dane Champion, Everest 23V-427 · June 14, 2023
  11. Great Dane wheel hubs may have an insufficient amount of lubrication, which could cause the hub bearings to fail. 2023 Great Dane Champion 23V-230 · March 31, 2023
  12. Great Dane retaining clip in the brake pad retaining assembly may be loose or could detach, loosening the brake pad. 2023 Great Dane Champion, Everest 22V-734 · September 30, 2022
  13. Great Dane incorrect axle spindle nuts may have been installed, which could result in bearing failure. 2023 Great Dane Champion 22V-448 · June 23, 2022
  14. Great Dane suspension radius rod mounting bolts were not properly tightened, which could allow the bolts to come loose and fall out. 2022 Great Dane Champion, Everest 22V-159 · March 15, 2022
  15. Great Dane wheel hubs may have an insufficient amount of lubrication, which could cause the hub bearings to fail. 2022 Great Dane Champion, Everest 21V-943 · December 7, 2021
  16. Great Dane screws that secure the bracket cover and end cover of the iABS unit may have been improperly tightened, which can allow the screws to loosen and back out, resulting in a loss of pressure in the unit. 2020 Great Dane Champion, Everest, Freedom 21V-841 · October 27, 2021
  17. Great Dane brake caliper mounting bolts may be insufficiently tightened, allowing the bolts to loosen. 2022 Great Dane Champion 21V-383 · May 24, 2021
  18. Great Dane iABS sensor cables may be plugged into the wrong ports on the electronic control unit (ECU). 2021–2022 Great Dane Champion, Everest 21V-094 · February 18, 2021