IC Bus Recb recalls
- IC Bus anti-lock brake system (ABS) indicator light does not remain illuminated when a malfunction exists, and when the vehicle's ignition switch is on, and the vehicle is in motion. 2021–2024 IC Bus Ce, Cesb, Re +9 more
- IC Bus sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak. 2018–2019 IC Bus Recb, Durastar, HV +2 more
- IC Bus due to a manufacturing issue, the roof hatch external handle may unexpectedly break under reasonable use. 2019 IC Bus Ce, Recb
- IC Bus driver side rear brakes may drag. 2016–2019 IC Bus Ce, Cesb, Recb +1 more
- IC Bus spring actuated parking brake may be improperly crimped to the long stroke service brake chamber, causing a service brake air leak and the possible separation of the spring brake chamber from the service brake section. 2019 IC Bus Ce, HC, Recb +8 more
- IC Bus drop hose fittings for the air brakes may not be oriented correctly, and, as a result, the brake hoses may contact the tire when the wheels are turned to the limit. 2015 IC Bus Recb
- IC Bus affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position. 2016 IC Bus Recb
- IC Bus affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position. 2007–2014 IC Bus Ae, Be, Casb +7 more
- IC Bus in the affected vehicles, the air brake hose for the front wheel service brakes may contact the tires when the steering is fully turned. 2015 IC Bus Recb
- IC Bus platform side plate of the affected wheelchair lifts may crack. 2007–2014 IC Bus Ae, Be, Besb +8 more
- IC Bus when the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. 2014 IC Bus Ce, Recb
- IC Bus school bus restraining barriers may have an insufficient weld at the base of the barrier frame that does not comply with the requirement of Federal Motor Vehicle Safety Standard (FMVSS), No. 2013 IC Bus Casb, Recb
- IC Bus these buses were manufactured February 11, 2010, through June 17, 2013. 2011–2014 IC Bus Ae, Be, Casb +5 more
- IC Bus injection pressure regulator (IPR) harness wire may break due to vibrational damage. 2012–2013 IC Bus Casb, Re, Recb
- IC Bus increased friction between the rear plate assemblies, P/NO. 2012–2013 IC Bus Be, Casb, Ce +2 more
- IC Bus in extremely cold conditions, these bendix relay valves may potentially develop internal leakage. 2012–2013 IC Bus Casb, Ce, Re +1 more
- IC Bus restraint belt on these lifts was designed to prevent the lift from moving, unless the tongue of the belt is fully engaged and latched in the buckle. 2009–2011 IC Bus Be, Ce, Fe +3 more
- IC Bus weld that retains a reinforcement rod inside the seat back frame tube may fail allowing the rod to fall out of the frame. 2011 IC Bus Ce, Recb