Seagrave recalls
Models
- Seagrave tie rod clamps may have been improperly heat-treated, causing them to fail and allowing the tie rods to separate. 2022 Seagrave Capital, Marauder
- Seagrave steering gears may have been assembled incorrectly, which can cause the gears to fracture. 2022 Seagrave Marauder
- Seagrave rear axle drive pinion may fracture. 2021 Seagrave Capital, Marauder
- Seagrave crossmember mounting plate may crack. 2011 Seagrave Capital, Marauder
- Seagrave fuel tubes between the fuel rail and the injectors for cylinders four, five, and six may fatigue and crack, which can result in a high pressure fuel leak. 2019 Seagrave Attacker, Capital, Marauder
- Seagrave sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak. 2017 Seagrave Attacker, Capital, Marauder
- Seagrave spin-on power steering filter may not have been tightened correctly, which can cause it to loosen and leak power steering fluid. 2019 Seagrave Attacker, Capital
- Seagrave depending on the specific wiring of the vehicle, the brake lights may falsely illuminate even without the brake pedal being pressed. 2017 Seagrave Capital, Marauder Ii
- Seagrave castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen. 2017 Seagrave Aerialscope
- Seagrave in the affected vehicle, the power steering fluid may overheat and cause the steering to unexpectedly lock during steering maneuvers. 2010 Seagrave Heavy Rescue Body
- Seagrave affected vehicles may be equipped with certain C20 and C21 split-shaft transmissions from Waterous. 2015 Seagrave Marauder Ii
- Seagrave when the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. 2013–2014 Seagrave TB30CS, TB50CO, TT06CX +2 more
- Seagrave are equipped with Meritor axle assemblies that were built with disc brakes using MGM J24 series air brake chambers. 2011 Seagrave Marauder Ii