Terex Advance recalls
Models
- Terex Advance front axle may have an incorrect thrust bearing installed. 2024 Terex Advance Commander
- Terex Advance bearing journals may not be fully seated in the steering knuckle assemblies, preventing the proper installation of the wheel end hub assemblies. 2023 Terex Advance Commander
- Terex boom rotation bearing bolts may not be tightened properly. 2023 Terex XT Pro, HRX50, HRX55 +1 more
- Terex Advance bolts connecting the drum to the drum drive plate may loosen, resulting in the drum separating from vehicle. 2023 Terex Advance Charger, Commander, MM300
- Terex Advance improper installation or tightening of the steering shaft may cause it to come loose from the steering column and result in a loss of steering control. 2022 Terex Advance Front Discharge Mixer
- Terex Advance front-drive steer axle fasteners may not have been tightened sufficiently and could come loose, resulting in a complete separation of the axle assembly joints. 2022 Terex Advance Front Discharge Mixer
- Terex Advance engine control module (ECM) may experience an internal short-circuit, which can result in an unexpected engine shut down. 2022 Terex Advance Front Discharge Mixer
- Terex Advance fuel tubes between the fuel rail and the injectors for cylinders four, five, and six may fatigue and crack, which can result in a high pressure fuel leak. 2016 Terex Advance Front Discharge Mixer
- Terex Advance shaft key for the chute swing motor was not installed properly, which could result in unintentional chute movement. 2021 Terex Advance Front Discharge Mixer
- Terex Advance axle output shafts were incorrectly heat treated, possibly causing them to fracture. 2020 Terex Advance FD4000, FD5000GL, FD7000B +1 more
- Terex Advance drive pins, a component with the axle sub-assembly, may have been cracked during assembly, possibly resulting in the pins fully fracturing. 2018 Terex Advance Front Discharge Concrete
- Terex Advance welds that attach the filler neck onto the 250 gallon pressurized water tank may fail. 2017 Terex Advance Front Discharge Concrete
- Terex Advance these front axles have a king-pin that may fracture and possibly result in wheel end separation. 2016 Terex Advance Front Discharge Concrete
- Terex Advance weld on the outer chute race may fail causing the main chute to detach and fall off while the vehicle is in motion. 2016 Terex Advance Front Discharge Concrete
- Terex Advance these ECM's may experience an internal electrical short that can cause a fuse to blow, resulting in an unexpected engine stall without the ability to restart the engine. 2016 Terex Advance Front Discharge Concrete
- Terex Advance affected axles may have hex nuts on the flange yoke that may not have been properly tightened. 2015 Terex Advance Mixer FD3000, Mixer FD4000, Mixer FD6000B
- Terex Advance affected vehicles have steerable tag axles operated by Eaton Hydraulics S26 Gear Pumps. 2011 Terex Advance Mixer FD4000B, Mixer FD5000B, Mixer FD6000B +1 more
- Terex Advance in the affected trucks, the bolts that secure the concrete mixing drum to the drum drive plate may not have been properly tightened. 2015 Terex Advance Front Discharge Concrete
- Terex Advance due to improperly secured castellated retaining nuts on the front axle leaf spring rear pin and the steering system, the rear end of the front axle leaf spring may partially disconnect from the front suspension hanger. 2013 Terex Advance Front Discharge Concrete
- Terex Advance u-bolt that attaches the front axle to the leaf spring can fracture. 2013 Terex Advance 4 Axle Glider, 5 Axle Glider, 6 Axle Glider +7 more