Check your VIN

Great Dane Everest recalls

9 recall campaigns for the Great Dane Everest, newest first.

  1. Great Dane all 8 tires may experience a loss of tire pressure while driving faster than 45 mph. 2024 Great Dane Champion, Everest 23V-427 · June 14, 2023
  2. Great Dane retaining clip in the brake pad retaining assembly may be loose or could detach, loosening the brake pad. 2023 Great Dane Champion, Everest 22V-734 · September 30, 2022
  3. Great Dane suspension radius rod mounting bolts were not properly tightened, which could allow the bolts to come loose and fall out. 2022 Great Dane Champion, Everest 22V-159 · March 15, 2022
  4. Great Dane wheel hubs may have an insufficient amount of lubrication, which could cause the hub bearings to fail. 2022 Great Dane Champion, Everest 21V-943 · December 7, 2021
  5. Great Dane screws that secure the bracket cover and end cover of the iABS unit may have been improperly tightened, which can allow the screws to loosen and back out, resulting in a loss of pressure in the unit. 2020 Great Dane Champion, Everest, Freedom 21V-841 · October 27, 2021
  6. Great Dane iABS sensor cables may be plugged into the wrong ports on the electronic control unit (ECU). 2021–2022 Great Dane Champion, Everest 21V-094 · February 18, 2021
  7. Great Dane axle nut retaining clips may have been improperly installed, potentially resulting in loose wheels and loss of vehicle control. 2020 Great Dane Everest 20V-202 · April 8, 2020
  8. Great Dane these trailers may have been built without brake rollers, causing a reduction in brake effectiveness. 2019 Great Dane Everest 18V-721 · October 12, 2018
  9. Great Dane during manufacturing, the adjuster anchor pins may not have been properly tightened, causing the pins to loosen or detach. 2019 Great Dane Everest 18V-700 · October 5, 2018