Check your VIN

MCI E4500 recalls

15 recall campaigns for the MCI E4500, newest first.

  1. MCI front door lower curb view glazing material is incorrect. 1988–2018 MCI 102D3, 102DL3, D4000 +9 more 25V-853 · December 10, 2025
  2. MCI when the lift's outer barrier is fully deployed, it may not withstand a sufficient amount of force, which could cause it to fail. 2005 MCI E4500, J4500 21V-737 · September 23, 2021
  3. MCI axle's alignment and low hydraulic pressure in the steering system may cause the steering system to lock, causing a loss of steering control at highway speeds. 1997–2001 MCI 102EL3, E4500, J4500 19V-027 · January 7, 2019
  4. MCI affected seats were manufactured in a way that the tether bar may push into the retractor panel door and potentially interfere with the seat belt locking mechanism. 2007 MCI E4500, J4500 15V-183 · March 30, 2015
  5. MCI seat track for the second row passenger seats may be missing a weld at the end of the seat track where it enters the frame structure. 2009 MCI E4500, J4500 14V-172 · April 4, 2014
  6. MCI specific potting compound used in the subject products for insulation was found to be capable of conducting electricity after being exposed to heat. 2000–2006 MCI 102D3, 102DL3, 102EL3 +10 more 13V-498 · October 17, 2013
  7. MCI under certain road and driving conditions, vehicle body roll and road inclination characteristics may adversely affect the slip angle calculation of the electronic stability control (ESC) system. 2003–2007 MCI D4000, D4000ISTV, D4500 +4 more 11V-524 · October 26, 2011
  8. MCI V-BAND clamp assembly, part numbers Q187684, Q187685, and Q187686, used to connect the inlet and outlet cone sections to the diesel oxidation catalyst (DOC)/DIESEL particulate filter (dpf) include a T-BOLT which can fracture and fail when subjected to stress or load. 2011 MCI E4500, J4500 11V-457 · August 31, 2011
  9. MCI underrated fuse may have been installed at the factory, which could blow, resulting in the windshield wipers not operating. 2011 MCI E4500, J4500 11V-379 · July 27, 2011
  10. MCI certain wires may have been incorrectly installed by mci at the factory which could result in the windshield wipers failing to operate. 2011 MCI E4500, J4500C, J4500 11V-150 · March 1, 2011
  11. MCI adhesive bond between the window glass and the aluminum window frame on the affected coaches may degrade. 2001–2006 MCI E4500, E4500C, J4500C +1 more 10V-373 · August 11, 2010
  12. MCI suspect axles may have had improper torque applied to the HUB/ROTOR/WHEEL adapter bolts during the assembly process. 2010 MCI D4000, D4500, E4500 +3 more 10V-199 · May 11, 2010
  13. MCI windshield wiper motor may fail to operate properly while the wiper system is functioning. 1999–2001 MCI E4500, J4500 10V-135 · April 6, 2010
  14. MCI may have been equipped with meritor wabco steering angle sensors (sas) which can develop internal friction between the sensor gears and the sensor housing as a result of external forces experienced on the vehicle including vibration. 2003–2009 MCI D4000ISTV, D4500, E4500 09V-196 · January 6, 2009
  15. MCI on certain motor coaches equipped with a slide switch to control the defroster blower speed, there is a speed controller for each of the two defroster fan motors. 2001–2003 MCI 102EL3, D4000, D4500 +1 more 06V-241 · June 7, 2006