Check your VIN

Zero Motorcycles DS recalls

15 recall campaigns for the Zero Motorcycles DS, newest first.

  1. Zero front brake hose may be twisted and become damaged, which can cause a brake fluid leak and a loss of brake pressure. 2024 Zero DSRP, DS, DSR +1 more 26V-048 · January 28, 2026
  2. Zero improperly routed key switch signal wires may break, causing a loss of drive power. 2023–2024 Zero DSRP, DS, DSR +1 more 25V-587 · September 9, 2025
  3. Zero front brake hose may be twisted and become damaged, which can cause a brake fluid leak and a loss of brake pressure. 2024 Zero DSRP, DS, DSR +1 more 25V-459 · July 11, 2025
  4. Zero DC-DC converter has an insufficient power output margin to operate the anti-lock braking system (ABS), instruments, lights, indicators, and any accessories that are connected to the accessory outlet at once. 2021 Zero FXS, DS, DSR +3 more 20V-640 · October 15, 2020
  5. Zero cell pouches in the battery packs may wear from contact with the holders, allowing humidity to enter the pouch and cause an electrical short within the battery. 2012 Zero DSP, DS, S 18V-215 · April 4, 2018 DO NOT DRIVE
  6. Zero information on the Vehicle Emission Control Information (veci) Label may indicate the wrong model year. 2018 Zero FXS, DS, DSR +3 more 17V-762 · November 28, 2017
  7. Zero anti-Lock Braking System (ABS) Hydraulic Control Unit (HCU) may have the wrong vehicle model information, possibly causing the ABS to function improperly. 2017 Zero FXS, DS, S 17V-145 · March 7, 2017
  8. Zero Motorcycles affected motorcycles have a DC-DC converter that may have insufficient output power. 2015 Zero Motorcycles DS, FX, S +1 more 16V-610 · August 22, 2016
  9. Zero Motorcycles due to a possible manufacturing defect, the motor rotor may contact the stator while riding. 2014 Zero Motorcycles DS, FX, S +1 more 14V-119 · March 12, 2014
  10. Zero affected motorcycles have controller firmware that, as a result of certain system faults, may shut off power to the motor. 2012–2013 Zero DSP, DS, FX +2 more 13V-635 · December 18, 2013
  11. Zero Motorcycles on the affected motorcycles, the front caliper mounting bolts are susceptible to corrosion which could lead to their cracking and possible fracture. 2011 Zero Motorcycles DS, S 13V-329 · July 30, 2013
  12. Zero Motorcycles these motorcycles are equipped with a motor encoder position signal that may drift over the extended use of the motorcycle. 2012 Zero Motorcycles DS, S 12V-455 · September 17, 2012
  13. Zero Motorcycles insufficient weatherproofing may cause a short circuit of the battery management system when subjected to wet conditions, resulting in the motorcycle inadvertently losing power. 2012 Zero Motorcycles DS, S, X +2 more 12V-310 · July 2, 2012
  14. Zero Motorcycles brake light switch at the front brake lever may not activate until significant brake lever travel occurs. 2011–2012 Zero Motorcycles DS, MXD, S +3 more 12V-307 · June 29, 2012
  15. Zero Motorcycles front brake caliper bracket may experience permanent deformation when subjected to high braking loads. 2009 Zero Motorcycles DS, S 11V-282 · May 16, 2011