Pierce Manufacturing Enforcer recalls
- Pierce Manufacturing firm-on-ground system light may remain illuminated after the rear stabilizer loses contact with the ground. 2015 Pierce Manufacturing Arrow XT, Enforcer, Impel +1 more
- Pierce Manufacturing steering linkage arm bolt may come loose, resulting in the steering linkage arm detaching from the steering motor. 2025 Pierce Manufacturing Arrow XT, Enforcer, Impel +2 more
- Pierce Manufacturing tires mounted on the front steer axles are incompatible with the wheels. 2023 Pierce Manufacturing Enforcer, Quantum, Velocity
- Pierce Manufacturing bumper may partially obstruct the rear lights. 2020–2023 Pierce Manufacturing Enforcer, Saber, Velocity
- Pierce Manufacturing electrical connector to the aerial turntable wiring harness may not be properly secured, which can result in connector corrosion and affect the leveling ability of the platform basket. 2019 Pierce Manufacturing Arrow XT, Enforcer, Velocity
- Pierce Manufacturing when the aerial platform is extended to its maximum angle, the platform mounting bracket may interfere with the basket handrail hinge peg and cause the handrail to detach from the basket. 2018 Pierce Manufacturing Arrow XT, Enforcer, Impel +1 more
- Pierce Manufacturing tie rod clamps may have been improperly heat-treated, causing them to crack and allowing the tie rods to separate. 2022 Pierce Manufacturing Arrow XT, Enforcer, Saber
- Pierce Manufacturing stokes basket mounting brackets may be insufficiently welded. 2010 Pierce Manufacturing Arrow XT, Dash, Enforcer +2 more
- Pierce Manufacturing steering gears may have been assembled incorrectly, which can cause the gears to fracture. 2021 Pierce Manufacturing Arrow XT, Dash, Enforcer +3 more
- Pierce Manufacturing fuel tubes between the fuel rail and the injectors for cylinders four, five, and six may fatigue and crack, which can result in a high pressure fuel leak. 2015 Pierce Manufacturing Arrow XT, Enforcer, Quantum +1 more
- Pierce Manufacturing sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak. 2017 Pierce Manufacturing Arrow XT, Enforcer, Impel +3 more
- Pierce rear LED lights may be too bright. 2016 Pierce Freightliner, Enforcer, Saber
- Pierce Manufacturing monitor is used to direct the water stream and adjust the spray pattern. 2020 Pierce Manufacturing Arrow XT, Enforcer, Impel
- Pierce Manufacturing due to a problem with the joystick controller, the vehicle's aerial device may move without operator input. 2018 Pierce Manufacturing Arrow XT, Dash, Enforcer +3 more
- Pierce Manufacturing rectangular tube in the upper mid-section of the aerial device may develop cracks and corrosion, possibly causing one of the tube walls to fail and the aerial device to become unsteady. 2019 Pierce Manufacturing Arrow XT, Enforcer, Impel +1 more
- Pierce Manufacturing due to improper manufacturing, the passenger-side knee air bag (KAB) may not properly inflate during a deployment event. 2019 Pierce Manufacturing Arrow XT, Dash, Enforcer +3 more
- Pierce Manufacturing aerial device may unexpectedly rotate to the right when the ladder is being extended. 2004 Pierce Manufacturing Arrow XT, Dash, Enforcer +3 more
- Pierce depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed. 2017 Pierce Commercial, Arrow XT, Dash +5 more
- Pierce Manufacturing bracket on the aerial device may detach from the aerial and fall to the ground. 2007 Pierce Manufacturing Arrow XT, Enforcer, Impel +2 more
- Pierce rings securing the valves may corrode over time after exposure to water, causing the ring to fail and the pressure relief valve to open, reducing the water pressure available for fire fighting. 2015 Pierce Commercial, Arrow XT, Enforcer +3 more
- Pierce Manufacturing castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen. 2015 Pierce Manufacturing Arrow XT, Enforcer, Impel +3 more
- Pierce Manufacturing hale interlock pressure switch can fail after prolonged exposure to extreme cold temperatures, preventing the fire truck water pump from operating. 2016 Pierce Manufacturing Arrow XT, Enforcer, Impel +2 more
- Pierce Manufacturing affected vehicles have a rear sway bar that may detach from the vehicle. 2012 Pierce Manufacturing Arrow XT, Dash, Enforcer +2 more
- Pierce Manufacturing affected vehicles have rear steer axle shafts that were not properly heat treated. 1999 Pierce Manufacturing Arrow XT, Dash, Enforcer +2 more
- Pierce Manufacturing affected vehicles may be equipped with certain C20 and C21 split-shaft transmissions from Waterous. 2015 Pierce Manufacturing Arrow XT, Dash, Enforcer +4 more
- Pierce Manufacturing affected vehicles may have a plastic plug installed in an unused port in the hydraulic pump for the aerial device. 2015 Pierce Manufacturing Enforcer, Impel, Velocity
- Pierce Manufacturing these pumps have 6" intake strainers that may have been improperly soldered during production and, as a result, the strainers may come apart during use, allowing parts of the strainer and debris to enter the pump, possibly damaging the pump. 2015 Pierce Manufacturing Arrow XT, Enforcer, Impel +3 more
- Pierce Manufacturing clamps on the heater hose may have been improperly installed allowing engine coolant to leak into the passenger compartment. 2014 Pierce Manufacturing Enforcer, Saber
- Pierce Manufacturing fastener cap over the bearing on the universal joint of the drive shaft may have been improperly tightened. 2016 Pierce Manufacturing Arrow XT, Dash, Enforcer +4 more
- Pierce Manufacturing affected vehicles are equipped with front drive axles whose hex nuts on the flange yoke may not have been properly tightened. 2015 Pierce Manufacturing Arrow XT, Enforcer, Saber +1 more
- Pierce Manufacturing in the affected vehicles, tears in the ball joint protective boots may result in contamination of the ball joints. 2006 Pierce Manufacturing Arrow XT, Dash, Enforcer +3 more
- Pierce Manufacturing affected vehicles have a driveshaft that may bend or twist possibly causing it disconnect. 2014 Pierce Manufacturing Arrow XT, Dash, Enforcer +2 more
- Pierce Manufacturing rear axle cast iron leaf spring spacer block may crack and fracture. 2015 Pierce Manufacturing Enforcer, Impel, Saber +1 more DO NOT DRIVE
- Pierce Manufacturing affected vehicles have front lower control arms that may crack and fracture. 2009 Pierce Manufacturing Arrow XT, Enforcer, Impel +2 more
- Pierce pierce Manufacturing Inc. 2009 Pierce Commercial, Arrow XT, Enforcer +4 more
- Pierce Manufacturing while raising or lowering the cab as part of vehicle maintenance, the mounts on which the cab tilt cylinders pivot may fatigue and fail allowing the cab to fall until the safety catch activates. 2000 Pierce Manufacturing Arrow XT, Dash, Enforcer +1 more
- Pierce Manufacturing these compartments extend inboard horizontally from the side of the rear body. 2005–2011 Pierce Manufacturing Arrow XT, Custom Contender, Dash +5 more
- Pierce are equipped with fuel tank straps that may corrode due to winter road salt or liquid DE-ICING chemicals. 1995–2003 Pierce Arrow, Commercial, Arrow XT +6 more
- Pierce Manufacturing after repeated use with excessive force, the accelerator pedal arm may bend and cause the pedal to move closer to the floor. 1998–2003 Pierce Manufacturing Arrow XT, Dash, Enforcer +1 more
- Pierce Manufacturing steering gear bracket may fracture and break. 1998 Pierce Manufacturing Arrow XT, Dash, Enforcer +3 more
- Pierce Manufacturing meritor wabco ex225 rear disc brake caliper may interfere with the onspot automatic tire chain brackets. 2006 Pierce Manufacturing Arrow XT, Dash, Enforcer +3 more
- Pierce Manufacturing these trucks may be equipped with DROP-DOWN fire hose trays mounted under the front bumper. 2003 Pierce Manufacturing Custom Contender, Dash, Enforcer +4 more