Honda recalls — Page 5
- Acura american Honda Motor Company, Inc.'s (Honda) is conducting a limited regional recall for certain model year 2003-2005 Accord, Civic, CR-V, Pilot and Acura MDX, model year 2003-2004 Odyssey and Element, and model year 2005 Acura RL, and 2006 Honda Ridgeline vehicles originally sold, or ever registered in California, and equipped with Takata-brand air bag inflators. 2003–2006 Acura MDX, RL, Accord +6 more
- Honda passenger side driveshaft may break while driving due to an improper heat treatment application during manufacturing. 2013 Honda Fit
- Honda shorting terminal, an electrical connector used to prevent air bag deployment before being installed into a vehicle, may have been damaged during assembly of the passenger-side side curtain air bag. 2014 Honda Odyssey
- Honda in the affected vehicles, the fuel pump strainer cover may deteriorate allowing fuel to leak out. 2005 Honda Odyssey
- Honda in the affected vehicles, during mounting of the tires, the tire bead may have gotten pinched between the assembly equipment and the steel wheel rims, resulting in damage to the tire. 2014 Honda Civic
- Honda rocker arm shaft retaining bolts may have been manufactured incorrectly resulting in the bolts loosening during engine operation. 2013 Honda CB500F, CB500FA, CB500X +2 more
- Honda due to a combination of system components and software, the Vehicle Safety Assist System (VSA) may apply the brakes unexpectedly. 2007 Honda Odyssey
- Acura due to electrical noise, a component in the air bag control module may fail causing the front air bags, side curtain air bags, and/or seatbelt pretensioners to deploy inadvertently while the vehicle is being operated. 2003 Acura MDX, Odyssey
- Honda during manufacturing of the engine piston, it is possible that the heat treatment process was not properly applied, resulting in the piston having an insufficient hardness level, making it more susceptible to premature wear. 2013 Honda Odyssey, Pilot
- Honda due to a manufacturing error, the Anti-Lock Brake System (ABS) may malfunction and lose anti-lock functionality. 2014 Honda CTX700
- Honda fuel tank neck may be out of specification causing the fuel pump to not properly seal to the fuel tank. 2013 Honda Accord
- Honda honda is re-recalling certain model year 2007-2008 Fit vehicles covered under previous recall 10V-033. 2007 Honda Fit
- Acura brake booster may be unable to maintain a vacuum when the brake pedal is depressed, decreasing brake assist. 2006 Acura RSX, S2000
- Honda in April 2013, Honda recalled 43,782 2012-2013 Honda Fit Sport vehicles. 2012 Honda Fit
- Acura during sub-freezing temperatures, the brake-shift interlock blocking mechanism may become slow and allow the gear selector to be moved from the Park position without pressing the brake pedal. 2012–2013 Acura RDX, CR-V, Odyssey
- Acura electrical capacitor may have been damaged during the manufacturing of the Vehicle Stability Assist (VSA) control module causing intermittent, automatic, minor brake application. 2005 Acura MDX, RL, Pilot
- Honda one or more rivets that attach the airbag module to the airbag cover may be missing. 2009–2011 Honda Odyssey, Pilot
- Acura interlock lever of the ignition switch may deform, which can allow the interlock function of a vehicle with an automatic transmission to be defeated. 2003 Acura MDX, Odyssey, Pilot
- Honda assembled with the incorrect steering column assembly. 2012 Honda Civic
- Honda fail to comply with the requirements of 49 CFR Part 567, "Certification." The incorrect values for Gross Vehicle Weight Rating, Gross Axle Weight Rating front and rear, tire size, and rim size were specified on the safety certification label. 2012 Honda CR-V
- Honda driver-side power window switch may fail or melt. 2002 Honda CR-V
- Honda some motorcycles may be equipped with drive chains that contain outer drive plates that were improperly heat-treated, resulting in plate fracture during use. 2012 Honda NC700XC, NC700XDC
- Honda incorrect passenger airbag status indicator may have been installed on the vehicles causing them to fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 2012 Honda Ridgeline
- Honda wire that supplies power to the trailer turn signal lights was inadvertently switched with the stop lamp wire. 2007 Honda Element
- Acura if the manual or power door lock is activated while an interior front door handle is being operated by an occupant, the cable connecting the interior door handle to the door latch mechanism may become loose and move out of position. 2012–2013 Acura ILX, CR-V
- Honda during assembly, the process required to seat the DRIVER'S side driveshaft and set the retaining clip was not completed. 2012 Honda Civic
- Acura in May 2012, Honda filed a defect report to recall certain model year 2007 and 2008 Acura TL vehicles. 2003–2007 Acura TL, Accord
- Honda in march 2012, honda filed a defect report to recall certain model year 2002 through 2004 CR-V and certain model year 2003 pilot vehicles. 2002–2003 Honda CR-V, Civic, Pilot
- Honda weld strength attaching the SUB-FRAME bushing collar to the PASSENGER-SIDE front lower arm is insufficient. 2006 Honda CR-V
- Acura vent shut float (vsf) valve case in the fuel tank assembly does not meet the design specifications. 2012 Acura MDX, Pilot
- Honda flaw can result in a leak of the pressurized gas, leading to reduced strut performance. 2008 Honda Odyssey
- Honda DRIVER-SIDE or PASSENGER-SIDE side curtain airbag inflator may not have been manufactured according to correct specifications. 2012 Honda Accord, Crosstour
- Honda spare tire installed in affected vehicles may not match the information on the VEHICLE'S tire information placard. 2011 Honda Ridgeline
- Honda retention nut for the front right lower suspension damper bolt may not have been tightened to the proper torque, potentially allowing the nut to loosen. 2012 Honda Odyssey
- Honda under certain conditions, there is a possibility that the combined braking SYSTEM'S secondary master cylinder may cause the rear brake to drag. 2001 Honda GL1800
- Honda tire information label applied to the swingarm may display incorrect tire size and air pressure specifications. 2010 Honda NT700
- Honda there is a possibility that the stitching that secures the end of the driver and front passenger lap section of the seatbelt may be incomplete or missing. 2009 Honda Pilot
- Honda DRIVER-SIDE power window switch may fail or melt. 2006 Honda CR-V
- Honda should the engine stall while the brake pedal is not pressed, there is a possibility that the engine control unit (ECU) software may cause the electric motor of the hybrid system to move the vehicle unexpectedly in the opposite direction of the selected gear. 2011 Honda CR-Z
- Honda outer race of the secondary shaft bearing may be broken during certain driving styles. 2005–2007 Honda Accord, CR-V, Element
- Honda when the rear suspension of the motorcycle is repeatedly bottomed out (fully compressed), the rear brake reservoir hose may become damaged and leak brake fluid. 2008–2009 Honda ST1300, ST1300A, ST1300PA
- Honda bank angle sensor may be incorrectly manufactured creating the possibility of an erroneous reading which could cause the engine to stall. 2010 Honda VT750
- Honda there is a possibility that an O-RING, which seals a connection in the fuel feed line, is misaligned. 2012 Honda Civic
- Honda there is a potential failure with the driver and the front passenger door power windows in which the window may come off the track causing the window to become inoperative and preventing it from being rolled up or down or it could drop into the door. 2011 Honda Odyssey
- Honda to prevent fuel from leaking out of a VEHICLE'S fuel tank into the evaporative emissions canister in the event a ROLL-OVER incident occurs, the fuel pump module is equipped with a roll over valve (rov). 2011 Honda Civic
- Honda if the front windshield wiper blades become frozen to the windshield and the wiper motor is switched on, one of the front windshield wiper linkage rods may bend or separate from the motor due to insufficient stiffness of the rod. 2011 Honda Odyssey
- Honda there is a potential for the voltage converter that relays power from the integrated motor assist (ima) system to the VEHICLE'S electrical components to fail. 2006 Honda Civic
- Honda there is a potential for one or more of the four spring assemblies on the ENGINE'S variable valve timing and lift electronic control (vtec) system to fail. 2009 Honda Fit
- Honda there is a potential failure with the engine wiring harness connector which may cause intermittent spark firing or the engine to stall. 2010 Honda Accord, CR-V
- Honda bolts that attach the lower left and right front damper bracket to the front suspension and the spindle nuts on the pilot may not have been properly tightened which may result in loss of steering. 2010–2011 Honda Accord, Pilot