Peterbilt 536 recalls
- Kenworth please see the recall report for a complete list of models. 2027 Kenworth T280, T380, T480 +9 more
- Kenworth tail brake light, upper and lower beam headlights, reverse light, and turn signal may not illuminate as intended. 2024–2025 Kenworth L770, T180, T280 +13 more
- Kenworth exterior lighting switch may fail, resulting in the hazard lights and the instrument display back-light brightness adjustment not functioning. 2023–2025 Kenworth T180, T280, T380 +6 more
- Kenworth throttle pedal assembly may contain an oversized magnet carrier, slowing the responsiveness or causing the pedal to stick. 2023–2024 Kenworth T180, T280, T380 +5 more
- Kenworth please see the recall report for a complete list of models. 2021–2024 Kenworth C500B, T280, T370 +20 more
- Kenworth front steer drive axles may have insufficient wheel bearing lubricant. 2024–2025 Kenworth T380, T480, 536 +2 more
- Kenworth tie rod or drag link assembly may contain an improperly heat-treated ball stud, causing the ball stud to break. 2025 Kenworth K270, K370, L770 +15 more DO NOT DRIVE
- Kenworth steering gear sector shaft may have been improperly heat-treated, which can cause the gear teeth to crack or fracture. 2025 Kenworth T280, T380, T480 +7 more
- Kenworth right-hand gear shifter stalk connectors may have been improperly crimped, resulting in a loss of communication. 2021 Kenworth T180, T280, T380 +13 more
- Kenworth steering gear assemblies may have been assembled incorrectly with fewer recirculating balls than are required, which may result in a loss of steering control. 2024 Kenworth L770, T280, T380 +13 more
- Kenworth glass lock ring on the cab mirror assembly may not be fully seated, allowing the mirror glass to detach. 2022 Kenworth T180, T280, T380 +5 more
- Kenworth timing of the trailer brake release may be delayed. 2020–2024 Kenworth T280, T380, T480 +3 more
- Kenworth remote Stage 2 fuel filter hoses may have been damaged during production, allowing the hoses to leak or disconnect. 2023 Kenworth T280, T380, T480 +3 more
- Kenworth adhesive thread-lock may not have been applied to the four flange mounted yoke bolt threads, allowing the driveline fasteners to loosen. 2023–2024 Kenworth T280, T380, T480 +3 more
- Kenworth when the brake pedal is fully applied and then released rapidly, the pedal plunger that connects the brake pedal to the brake valve may become disconnected, causing the service brakes to fail. 2021 Kenworth T280, T380, T480 +3 more
- Kenworth engine control module (ECM) may experience an internal electrical short-circuit, causing the engine to stall. 2023 Kenworth K270, K370, T280 +18 more
- Kenworth steering gears may have been assembled incorrectly, which can cause the gears to fracture. 2022 Kenworth C500, T170, T270 +24 more
- Kenworth internal components of the transmission actuator may slip, causing the actuator to become miscalibrated. 2021–2022 Kenworth T180, T280, T380 +2 more
- Kenworth methane detection system will not function if the system loses power. 2016–2021 Kenworth T270, T280, T440 +5 more
- Kenworth work brake (winch brake) may unintentionally disengage the service brakes during winching operations, causing the vehicle to roll. 2019–2022 Kenworth T880, W990, 389 +4 more
- Kenworth fuel leak may occur from the fuel hose between the fuel pump and the remote fuel filter head. 2021 Kenworth T270, T280, T370 +7 more
- Peterbilt B6.7N engine that has certain engine control module calibrations. 2021 Peterbilt 536